Unleash the Hare! Sale - Sitewide Use code "HARE10" for 10% off your order at checkout!

Oops!

404 - PAGE NOT FOUND

The page you are looking for might have moved or is temporarily unavailable.

Go To Homepage

(!Topic Name="0-home-featured-products-2" !)

We are dedicated to providing our customers with the highest quality products and services in a timely and efficient manner.

Are you looking for:

Hanwei Tinker Norman Sword Sharp by Paul Chen
Our Hanwei Tinker Norman Sword Sharp is made by Paul Chen. The Tinker Norman sword pair, with their distinctive cruciform guards and brazil-nut pommels, are similar in weight and static balance and offer virtually identical handling characteristics. Both are harmonically balanced, optimizing cutting ability in the case of this sharp version. The blade is forged in 5160 high carbon steel and marquenched to HRc50-52, allowing superior edge retention.The grip is wood-cored and leather-covered over a cord wrap. See models SH2427 for the Tinker Blunt Norman Sword. Made by Hanwei.

Features
* 5160 Spring Steel
* Marquenched to Hrc 50-52
* Sharp and Blunt Versions
* Blades are Interchangeable
* Fits Martial Arts and Cutting Needs

Specifications
Overall: 36 1/4"
Blade Length: 30 3/4"
Handle Length: 5"
Weight: 2lb 8oz
Blade Steel: 5160 Steel

Specs will vary slightly from piece to piece.
Hanwei Tinker Pearce Two Hand Sword Sharp by Paul Chen
The Hanwei Tinker Pearce Two Hand Sword Sharp by Paul Chen or longsword features nearly identical handling of its Blunt companion, but with thick Sharpened edges for Cutting Practice. Tinker Pearce has developed these matching longswords to satisfy the need of every Western Martial Arts practitioner and sword enthusiast, to have a matching set of sharp and blunt swords for cutting and safe training practice. The swords meet Tinker`s exacting quality requirements and are built in much the same way as his custom pieces. Each blade is forged from 5160 Spring Steel, Marquenched to the desired hardness of 50-53 Hrc while the tang is drawn back to the low 30s Hrc. The very end of the tang is threaded to fit an allen nut recessed into the pommel which allows for dismantling of the hilt assembly for inspection or to exchange blades if needed. See item OH2396 for the replacement blade.

Features

* 5160 Spring Steel
* Marquenched to 50-53 Hrc
* Sharp and Blunt Versions
* Blades are Interchangeable
* Fits Martial Arts and Cutting Needs

Measurements
Overall: 47"
Blade Length: 35"
Handle Length: 12"
Weight: 2lb 14oz
Point of Balance: 3 1/2"
Point of Harmonics: 21 3/4"
Width at Guard: 2 1/8"
Width at Tip: 3/4"
Thickness at Guard: 25"
Thickness at Tip: .09"
Blade Steel: 5160
Hrc Edge: 50~53 Hrc
Handle Material: Leather over cord wrap, wooden core
Genuine Drinking Horns and Mugs for Medieval, LARP, Viking Reenactors, and Ren Faire Enthusiasts
Genuine Drinking Horns and Mugs for Medieval, LARP, Viking Reenactors, and Ren Faire Enthusiasts
Scandinavian Vendel Chieftain's Sword Damascus Blade - Tin Plated - Brass Hilt Accents - PRS411D
This 8th Century Scandinavian Vendel Sword has a blade which is skillfully forged from Damascus steel and its brilliant and ripple-like patterning was created when several different steels were forged together into a single blade. Original swords of this type were usually created with pattern welded blades which, like damascus, were forged by melding together several different steels into a single blade in a process which left visible patterning on the blade surface.

The finely detailed guard and pommel of the hilt are made from quality-cast brass with a tin plated finish and these components are completed with contrasting bands of antiqued brass for contrast. Historically, tin was a prized decorative element for swords such as this due to its relative scarcity and resemblance to silver. The grip is made from hardwood and the blade is durably anchored into the hilt. Like originals, the pommel is a two-part construction created by riveting a pommel cap over the pommel base. Red enamel is inlaid into the pommel to give it a blaze of scarlet color as seen on the preserved swords of champions, nobles and chieftains.

Included with the sword is leather-bound scabbard of wood with tin-plated brass fittings and a wooden suspension loop which can be used to sling the sword from your own sword belt or baldric.

Features:
* Damascus Steel Blade
* Brass Hilt with Tin Plated Accents
* EN45 High Carbon Steel Blade
* Red Inlaid Pommel Cap
* Complete with leather covered scabbard

Specifications:
Overall Length: 35-3/16''
Blade Length: 28-13/16''
Grip: 3-1/2''
P.O.B.: 4-3/8''
Thickness: 4 mm - 3.8 mm
Width: 53.6 mm
Edge: Unsharpened
Pommel: Nut - Riveted
Weight: 3 lb 1.2 oz
Scandinavian Vendel Chieftain's Sword Damascus Blade - Brass Hilt - Tin Plated Accents - PRS412D
This 8th Century Scandinavian Vendel Sword has a blade which is skillfully forged from Damascus steel and its brilliant and ripple-like patterning was created when several different steels were forged together into a single blade. Original swords of this type were usually created with pattern welded blades which, like damascus, were forged by melding together several different steels into a single blade in a process which left visible patterning on the blade surface.

The finely detailed guard and pommel of the hilt are made from quality-cast brass with an antiqued finish and these components are completed with contrasting bands of tin-plated brass for a silver-like contrast. Historically, tin was a prized decorative element for swords such as this due to its relative scarcity and resemblance to silver. The grip is made from hardwood and the blade is durably anchored into the hilt. Like originals, the pommel is a two-part construction created by riveting a pommel cap over the pommel base. Red enamel is inlaid into the pommel to give it a blaze of scarlet color as seen on the preserved swords of champions, nobles and chieftains.

Included with the sword is leather-bound scabbard of wood with antiqued brass fittings and a wooden suspension loop which can be used to sling the sword from your own sword belt or baldric.

Free Shipping: Continental U.S. standard ground.

Features:
* Damascus Steel Blade
* Antiqued Brass Hilt with Tin Plated Accents
* EN45 High Carbon Steel Blade
* Red Inlaid Pommel Cap
* Complete with leather covered scabbard

Specifications:
Overall Length: 35-1/4''
Blade Length: 28-7/8''
Grip: 3-1/2''
P.O.B.: 4-1/2''
Thickness: 4.4 mm - 4.1 mm
Width: 54.1 mm
Edge: Unsharpened
Pommel: Nut - Riveted
Weight: 3 lb 2.7 oz
Loading...
x
Chat service by BoldChat