Oops!
404 - PAGE NOT FOUND
The page you are looking for might have moved or is temporarily unavailable.
We are dedicated to providing our customers with the highest quality products and services in a timely and efficient manner.
Are you looking for:
Our Sharpening Lever, Screw, 2 Pole, 4 pk are Screw-pivot, double pole, sharpening levers for harps. The Lever has a screwed arm that lifts to change the note of the string from the natural note to the sharp. The screw holds the arm, but is not adjustable for tension. When the lever is down it is free of the strings. When the lever is in the up position, it is engaging the strings. These have a grooved double pole mechanism, usually used for longer and thicker strings.
Measure your existing levers carefully to match the size.
With the lever in the down position, measure from the anchor plate of the lever (the part screwed to the harp) to the poles. The distance to the closer, bottom pole is 9 mm (standard), 10mm (wide), 8mm (sm & lg matt). The distance to the further, upper pole is 19 mm(standard & lg matt), 18mm (sm matt), 21mm (wide). The over all length of the lever in the down position is 1 11/16 inches, 43 mm (standard), 1 3/4in (wide, sm & lg matt). The length of the pole itself is 5 mm(standard, sm & lg matt), 8mm (wide).
The amount of lift, can be adjusted by pulling or pushing the bridge pin in by a 1/16 of an inch. This changes the point at which the string is engaged by the pole. You can also loosen the screw holding the lever to the harp and move the lever up or down. Again, by only a 1/16 of an inch at a time; very minor changes will have profound effects on the string’s notes.
You need to supply your own 5/8 inch wood screw to attach the lever; available at most hardware stores.
The finely detailed guard and pommel of the hilt are made from quality-cast brass with a tin plated finish and these components are completed with contrasting bands of antiqued brass for contrast. Historically, tin was a prized decorative element for swords such as this due to its relative scarcity and resemblance to silver. The grip is made from hardwood and the blade is durably anchored into the hilt. Like originals, the pommel is a two-part construction created by riveting a pommel cap over the pommel base. Red enamel is inlaid into the pommel to give it a blaze of scarlet color as seen on the preserved swords of champions, nobles and chieftains.
Included with the sword is leather-bound scabbard of wood with tin-plated brass fittings and a wooden suspension loop which can be used to sling the sword from your own sword belt or baldric.
Features:
* Damascus Steel Blade
* Brass Hilt with Tin Plated Accents
* EN45 High Carbon Steel Blade
* Red Inlaid Pommel Cap
* Complete with leather covered scabbard
Specifications:
Overall Length: 35-3/16''
The finely detailed guard and pommel of the hilt are made from quality-cast brass with an antiqued finish and these components are completed with contrasting bands of tin-plated brass for a silver-like contrast. Historically, tin was a prized decorative element for swords such as this due to its relative scarcity and resemblance to silver. The grip is made from hardwood and the blade is durably anchored into the hilt. Like originals, the pommel is a two-part construction created by riveting a pommel cap over the pommel base. Red enamel is inlaid into the pommel to give it a blaze of scarlet color as seen on the preserved swords of champions, nobles and chieftains.
Included with the sword is leather-bound scabbard of wood with antiqued brass fittings and a wooden suspension loop which can be used to sling the sword from your own sword belt or baldric.
Free Shipping: Continental U.S. standard ground.
Features:
* Damascus Steel Blade
* Antiqued Brass Hilt with Tin Plated Accents
* EN45 High Carbon Steel Blade
* Red Inlaid Pommel Cap
* Complete with leather covered scabbard
Specifications:
Overall Length: 35-1/4''
⭐ PERFECT SIZE ♦♦ ideal to still being easy to carry around on event while offering enough volume for delighting even the thirstiest Viking warrior!
⭐ 100% LEAK FREE & ETHICALY SOURCED GENUINE HORN ♦♦ Our drinking horns mugs are individually made by hand, highly polished and sealed to keep the horn beautiful and leak free for years to come. Each one is unique and the result of patient craftsmanship by skilled horn makers using only 100% real horn, carefully chosen for their beauty, strength, and sturdiness. As with any natural product, the color and shape will have natural variations. NOT TWO ARE THE SAME!
⭐ 100% GENUINE LEATHER HOLDER ♦♦ With the carefully handcrafted HOLDER OFFERED FOR FREE with your horn, you will never loose it and will always have a place to hold it on your belt next to your trusted axe or deadly sword! ♦♦ Wondering how to pack & transport your lovely horn to your event ? We got you covered! ⭐ A NICE PROTECTIVE MYTHROJAN BAG IS ALSO OFFERED FOR FREE!
⭐ IDEAL FOR AMAZING MEDIEVAL EVENTS, SCA, WEDDINGS, COSPLAY or LARP! Is there anything better than sharing a good beer or a nice hydromel with good friends at a warm banquet or a memorable medieval wedding ? ♦♦ Wherever your adventure is set, our beautiful drinking horns mugs will follow you in all your feasts and banquets from the simple battlefield encampment to the impressive tables of the mead hall of your warlord!
Ounces: Approximately 20
Other items for display only